The rear tipping dump truck trailer is a new type of semi-trailer dump truck newly developed by our company. It has the characteristics of low center of gravity and not easy to lift. The frame and compartment have obtained national patents, and the frame is made of 16 manganese beam plates, which greatly increases the bearing strength. The center of gravity is lowered to 1.3 meters to 1.4 meters, and it is not easy to roll over during transportation. The damage to tires, leaf springs and frame is much reduced.
The carriage adopts the pattern of narrow front and wide rear. According to the principle of triangle, when the carriage is lifted, its center of gravity is relatively concentrated. When the corner line is inclined to a certain angle, the side dime of the big box is perpendicular to the ground, and the two sides of the bottom flat line are different. 10 cm, even the big box will not turn over. The front and narrow design of the big box is more conducive to the self-unloading of the goods, which is not easy to be blocked, and the goods will slide down evenly, so that there will be no side-to-side and side-to-side situations, so the car will not roll over.
Features of back tipping semi-trailer:
The size of the rear tipping dumper is: 10.5 meters long × 2.55 meters wide × 1.50m wall height. It is currently a rear tipping dump model that meets the requirements of the Ministry of Industry and Information Technology. It is not like a flat rear tip that will face the drawbacks of being investigated and modified. , Unlike the standard vehicle rollover, there are restrictions on the unloading site, so it is easier to get on the road. This car has different lengths and widths to choose from, which is convenient for users to configure flexibly according to actual needs. The total mass is 60 tons, light pull and fast running, safe unloading, and high transportation efficiency. There is no need to worry about being checked and modified by relevant departments. save money.